Genuine Bulova Factory 214 White/Flat 24 Hour Dial !
Mar 9, 2018 16:01:24 GMT -8
Post by Accutronitis on Mar 9, 2018 16:01:24 GMT -8
Yes you guessed it, Another Accutron Resource Forum first ! Seen here for the first time ANYWHERE The Genuine Bulova Factory 214/214H caliber movement Flat/White 24 Hour Dial ! WOW !
Genuine New Old Stock white Bulova Timer Labs dials for Bulova 214/214H caliber movements.This dial is NOT for a Bulova 214/214H caliber Wrist Watch Case...
These Dials are from the "Bulova Time Labs" for one of their Aerospace Instrument Panel clocks... The FLAT Dial will not allow the movement to sit correctly in a standard 214 wristwatch case - there won't be enough depth add to that the dial mounting feet and the indexing notches for the case alignment dowel are situated 90 degrees different as well... The 6 o:clock Marker will be in the 12 o:clock position with the 24 Hour BTL dials OR the 3 o:clock Marker will be in the 6 o:clock position with the 12 Hour BTL dials if someone attempted to use this dial in a wrist watch case !
You can learn more about the "dished" dials use in the Bulova Accutron 214 wrist watches verses the "flat" dials here...
accutronfacts.freeforums.net/thread/287/genuine-accutron-214h-dials-dished
The flat dials were used by Bulova Timer Labs and the differences between them that prevent them from being interchangeable between the Bulova wrist watches and the Bulova Timer Labs panel clocks and timers are detailed there...
There you have it, Another "REMEMBER YOU SEEN THESE HERE FIRST" from The Accutron Resource Forum !
Genuine New Old Stock white Bulova Timer Labs dials for Bulova 214/214H caliber movements.This dial is NOT for a Bulova 214/214H caliber Wrist Watch Case...
These Dials are from the "Bulova Time Labs" for one of their Aerospace Instrument Panel clocks... The FLAT Dial will not allow the movement to sit correctly in a standard 214 wristwatch case - there won't be enough depth add to that the dial mounting feet and the indexing notches for the case alignment dowel are situated 90 degrees different as well... The 6 o:clock Marker will be in the 12 o:clock position with the 24 Hour BTL dials OR the 3 o:clock Marker will be in the 6 o:clock position with the 12 Hour BTL dials if someone attempted to use this dial in a wrist watch case !
You can learn more about the "dished" dials use in the Bulova Accutron 214 wrist watches verses the "flat" dials here...
accutronfacts.freeforums.net/thread/287/genuine-accutron-214h-dials-dished
The flat dials were used by Bulova Timer Labs and the differences between them that prevent them from being interchangeable between the Bulova wrist watches and the Bulova Timer Labs panel clocks and timers are detailed there...
There you have it, Another "REMEMBER YOU SEEN THESE HERE FIRST" from The Accutron Resource Forum !